Our Manufacturing Facilities

Using state-of-the-art technologies to achieve excellence in manufacturing

Manufacturing Locations

Our state-of-the-art manufacturing facilities are spread across three locations – Dewas, Thane and Pithampur. From gear manufacturing to
transmission assembly, these facilities house the latest technologies, enabling us to deliver super quality products to our customers.

Located in Madhya Pradesh, India, our state-of-the-art Dewas plant houses the latest technologies and covers an area of around 30 acres with another 16 acres of land available for future expansion.

Eicher Engineering Components

(A Volvo Group and Eicher Motors Joint Venture)

78-86 & 87A, Industrial Area No. III, A.B. Road, Dewas, 455001, Madhya Pradesh, India

Contact Number: +91-7272-426600, +91-7272-670600

Fax: +91-7272-258185

Production Capacity:

Gear & Shafts - 250,000 nos p.m., Crown Wheel & Pinions - 16000 sets p.m. and Straight Bevels - 25000 nos p.m.

Established in:

Unit-1 2006 (taken over by Eicher) and Unit-2 2012 (Greenfield facility)

Products:

Transmission Gears & Shafts, Engine Gears, Crown Wheels & Pinions, Straight Bevels and Transmission Assemblies.

Certification:

ISO/TS 16949:2009, ISO 14001:2004 and OHSAS 18001:2007

More Highlights:

  • Equipped with world class CNC Hobbing Machines (from Mitsubishi, Leibherr & Gleason) and CNC Shaving Machines (from Kanzaki, SICMAT & Mitsubishi).
  • Lorenz, Fellows & Leibherr CNC Shaping Machines.
  • CNC Bore and Cylindrical Grinding Machines (from PMT, Bestek, Toyo & Toyoda) & Hard Turning machines (from Mazak, LMW & ACE).
  • Klingelnberg Gear Testers (P40 & P65) for checking gears up to 650 mm dia; state-of-the-art standard rooms and metallurgy labs with all latest equipment.
  • Gleason Hurth Shaving Cutter Re-sharpening Machine - with 9 axes controlled Siemens 840D software equipped with simulation which provides a graphic display illustrating the exact geometry of a tooth flank after grinding.
  • CNC Gear Grinding machines One of the largest Ground Gear suppliers in the country. CNC Gear Grinding Machine (From Reishaeur, Samputensilli, Leibherr and Klingenberg).
  • State-of-the-art Continuous Gas Carburising Furnace (from Aichelin) - fully PLC controlled with robotics for Press Quenching.
  • PLC Controlled Sealed Quench Furnaces (with hot oil & cold oil quenching facilities from Aichelin & Ipsen).
  • Gas Nitriding, Shot Peening and Plug Quenching facilities (as required by the customer).
  • Ultrasonic washing machines available for high cleanliness of gears; along with latest technology in cleanliness measurement.
  • Robots and low cost automation in most of the processes.
  • Dedicated New Product Development Cell to ensure lower new product sample development lead times.

Our Pithampur plant spreads across 9.4 acres of land and is located in the Special Economic Zone of Pithampur, Madhya Pradesh. The facility is certified to various systems and manufactures a variety of engineering components for our global customers.

Eicher Engineering Components

(A Volvo Group and Eicher Motors Joint Venture)

Plot Nos. A-1 to 3-B & C-51 to 56, Phase - 1, Special Economic Zone, Pithampur - 454775, Dist. Dhar. Madhya Pradesh, India

Contact Number: +91-7292-426500

Fax: +91-7292-426524

Production Capacity:

5000 assemblies p.m.

Established in:

2009 (Greenfield facility).

Products:

Driveline Aggregates, Drop box assemblies.

Certification:

ISO 9001:2008, ISO 14001:2004, OHSAS 18001:2007

More Highlights:

  • It has three assembly lines, one for Light Duty, second for Heavy Industrial Gear boxes and the third line for heavy Axles and Transmission assemblies.
  • 100 % Dust Proof assembly line through Forced Draft Ventilation.
  • Ergonomically designed assembly work stations with display of Assembly Operation sequence at each stage.
  • Demag KBK Hoists & roller conveyors used for material handling.
  • Legris make Aluminium pipe Compressed Air line with in-built Refrigerated Air Dryer Compressor (Atlas copco make).
  • Each assembly line is equipped with Leak Testing Machine (working on pressure drop principle) with pressure range of 0 to 2000 cc/sec and accuracy 0.1 % FSD.
  • Painting Booth with Dry-Off Oven.
  • Assembly line equipped with Millipore Kit to check cleanliness of components.
  • Washing machines equipped with hot spray jet to wash Castings, Gear, & Shafts.
  • Inventum induction heating machine for bearing heating.
  • Fully equipped RQC area for incoming material inspection.

Located in the suburbs of Mumbai, Maharashtra, this plant was originally setup in 1964 and taken over by Eicher in 1992. It has a total area of 6.5 acres and is widely known for being the first commercial gear manufacturing facility in India.

Eicher Engineering Components

(A Volvo Group and Eicher Motors Joint Venture)

S.V. Road, Chitalsar, Manpada, Thane - 400607, Maharashtra, India

Contact Number: +91-22-6787 5500

Fax: +91-22-6787 5500

Production Capacity:

Gears - 40,000 nos p.m., Crown Wheel & Pinions - 22000 sets p.m. and Straight Bevels - 70000 nos p.m.

Established in:

1964 (as Ramon & Demm Ltd. Taken over by Eicher in 1992).

Products:

Differential and Transmission Gears.

Certification:

ISO/TS 16949:2009

More Highlights:

  • Gleason batteries for Spiral and Hypoid gears including Gleason 116 CNC machines for Crown Wheel Pinions
  • Gleason Coniflex machines for Straight Bevel Gear
  • Pfauter, Liebherr, Mitsubishi (CNC) and Cleveland Hobbing machines
  • Hurth and Churchill Gear Shaving Machines
  • Matrix & MCZ Spline Grinding Machines
  • State of the art heat treatment facilities e.g. Continuous Gas Carburizing Furnace (CGCF) from Aichelin (Austria) & PLC controlled Sealed Quench Furnaces
  • CNC Bore and Cylindrical Grinding machines
  • Gleason CNC Lapping and Testing equipment for Crown Wheel Pinion pairing and testing
  • 3-D Co-ordinate Measuring Machine, Computerized Maag Gear Tester, Shimadzu Micro hardness tester, Olympus 313UN microscope, Demm Noise Tester etc., which help in strict adherence to quality standards