ABOUT

Our Vision

“To be recognised as the industry leader driving modernisation in commercial transportation in India and the developing world”

VECV

CERTIFICATION

ISO/TS 16949:2009

Manufacturing

Locations

  • Address:

    Eicher Engineering Components

     

    VE Commercial Vehicles Ltd.

    (A Volvo Group and Eicher Motors joint venture)

    S. V. Road, Chitalsar, Manpada, Thane - 400607, Maharashtra, India

     

    +91-22-6787 5500

    +91-22-25894292

    Production

    Capacity:

    CWP - 22000 sets p.m., Transmission Gears - 40000 nos. p.m., Straight Bevels - 70000 p.m.

     

    Established

    in:

    1964 (as Ramon & Demm Ltd.; taken over by Eicher in 1992)

     

    Products:

    Differential and Transmission Gears

     

    Certification:

    ISO/TS 16949:2009

     

    Located in Thane, Maharashtra, India, the area of the plant is approx. 26000 sq m. The plant houses state-of-the-art machines:

    Gleason batteries for Spiral and Hypoid gears including Gleason 116 CNC machines for Crown Wheel Pinions
    Gleason Coniflex machines for Straight Bevel Gear
    Pfauter, Liebherr, Mitsubishi (CNC) and Cleveland Hobbing machines
    Hurth and Churchill Gear Shaving Machines
    Matrix & MCZ Spline Grinding Machines
    State of the art heat treatment facilities e.g. Continuous Gas Carburizing Furnace (CGCF) from Aichelin (Austria) & PLC controlled Sealed Quench Furnaces
    CNC Bore and Cylindrical Grinding machines
    Gleason CNC Lapping and Testing equipment for Crown Wheel Pinion pairing and testing
    3-D Co-ordinate Measuring Machine, Computerized Maag Gear Tester, Shimadzu Micro hardness tester, Olympus 313UN microscope, Demm Noise Tester etc., which help in strict adherence to quality standards
  • Address:

    Eicher Engineering Components

     

    VE Commercial Vehicles Ltd.

    (A Volvo Group and Eicher Motors Joint Venture)

    78-86 & 87A, Industrial Area No. III, A. B. Road, Dewas - 455001, Madhya Pradesh, India

     

    +91-7272-426600, +91-7272-670600

    +91-7272-258185

    Production

    Capacity:

    Gears & Shafts - 250,000 nos. p.m., Crown Wheels & Pinions - 16,000 sets p.m., Straight Bevels - 25,000 nos. p.m.

     

    Established

    in:

    Unit 1 - 2006 (taken over by Eicher); Unit 2 - 2012 (Greenfield facility)

     

    Products:

    Transmission Gears & Shafts, Engine Gears, Crown Wheels & Pinions, Straight Bevels

     

    Certification:

    ISO/TS 16949:2009, ISO 14001:2004, OHSAS 18001:2007

     

    Located in Dewas, Madhya Pradesh, INDIA, the area of the plant is approx. 71000 sq m. The plant houses technologically advanced machines/equipment:

    Batteries of CNC Hobbing Machines (from Mitsubishi, Leibherr & Gleason) and CNC Shaving Machines (from Kanzaki, SICMAT & Mitsubishi)
    Lorenz, Fellows & Leibherr CNC Shaping Machines
    CNC Bore and Cylindrical Grinding Machines (from PMT, Bestek, Toyo & Toyoda) & Hard Turning machines (from Mazak, LMW & ACE)
    Klingelnberg Gear Testers (P40 & P65) for checking gears up to 650 mm dia; state-of-the-art standard rooms and metallurgy labs with all latest equipment
    Gleason Hurth Shaving Cutter Re-sharpening Machine - with 9 axes controlled Siemens 840D software equipped with simulation which provides a graphic display illustrating the exact      geometry of a tooth flank after grinding
    CNC Gear Grinding machines(from Reishaeur& Samputensilli)
    State-of-the-art Continuous Gas Carburising Furnace (from Aichelin) - fully PLC controlled with robotics for Press Quenching
    PLC Controlled Sealed Quench Furnaces (with hot oil & cold oil quenching facilities from Aichelin&Ipsen)
    Gas Nitriding, Shot Peening and Plug Quenching facilities (as required by the customer)
    Ultrasonic washing machines available for high cleanliness of gears; along with latest technology in cleanliness measurement
    Robots and low cost automation in most of the processes
    Dedicated New Product Development Cell to ensure lower new product sample development lead times

    The advanced technology available at this plant also ensures that the gears & shafts manufactured here are of the highest quality.

  • Address:

    Eicher Engineering Components

     

    VE Commercial Vehicles Ltd.

    (A Volvo Group and Eicher Motors Ioint Venture)

    Plot Nos. A-1 to 3-B & C-51 to 56, Phase - 1, Special Economic Zone, Pithampur - 454775, Dist. Dhar, Madhya Pradesh, India

     

    +91-7292-426500

    +91-7292-426524

    Production

    Capacity:

    5000 assemblies p.m.

     

    Established

    in:

    2009 (Greenfield facility)

     

    Products:

    Driveline Aggregates (before Certification)

     

    Certification:

    ISO 9001:2008, ISO 14001:2004, OHSAS 18001:2007

     

    The plant is located in the Special Economic Zone (SEZ) of Pithampur in Madhya Pradesh, INDIA manufacturing diverse varieties of custom made gearboxes as per demands of worldwide clientele.

    The total area of the plant is approx. 38000 sq m and construction of about 2100 sq m has been done in such a way that in future, the same can be expanded to cater to the growing demand in this sector.

    Significant features of the plant are as follows:

    It has three assembly lines, one for Light Duty, second for Heavy Industrial Gear boxes and the third line for heavy Axles and Transmission assemblies
    100 % Dust Proof assembly line through Forced Draft Ventilation
    Ergonomically designed assembly work stations with display of Assembly Operation sequence at each stage
    Demag KBK Hoists & roller conveyors used for material handling
    Legris make Aluminium pipe Compressed Air line with in-built Refrigerated Air Dryer Compressor (Atlas copco make)
    Each assembly line is equipped with Leak Testing Machine (working on pressure drop principle) with pressure range of 0 to 2000 cc/sec and accuracy 0.1 % FSD
    Painting Booth with Dry-Off Oven
    Assembly line equipped with Millipore Kit to check cleanliness of components
    Washing machines equipped with hot spray jet to wash Castings, Gear, & Shafts
    Inventum induction heating machine for bearing heating
    Fully equipped RQC area for incoming material inspection